EZ3008sc Fluoride Ion-Selective Electrode (ISE) Analyser, 1 stream, 4x mA

EZ3008sc Fluoride Ion-Selective Electrode (ISE) Analyser, 1 stream, 4x mA
Kat. číslo produktu: EZ3008.9800140T
Jednotková cena bez DPH Kontaktujte nás

Stable Performance in Changing Conditions

The EZ3008sc delivers temperature controlled, discontinuous fluoride measurements with multi stream capability. Operators get stable, reliable data during process fluctuations, reducing manual checks and adjustments while maintaining confident day to day water quality control.

Reduced Maintenance and Service Costs

Designed for long-term operation, the analyser uses gel-filled ion-selective electrodes that eliminate the need for electrolyte refilling. This technology reduces reagent consumption, routine service interventions, maximises analyser uptime, and lowers the total cost of ownership over the instrument’s lifetime.

Flexible Connectivity for Legacy and Modern Platforms

Integrate seamlessly into existing PLC, SCADA, DCS and plant network architectures with a built-in industrial panel PC. Real-time data transmission provides immediate visibility into diagnostics and status, enabling faster responses and improved decision-making across your facility.

Flexible Analysis for Multiple Streams

Conduct quick spot checks and investigations without interrupting routine monitoring using built-in grab sampling. When combined with the optional 8-channel sample stream, one analyser sequentially measures multiple process points: maximising asset utilization and coverage while simplifying your system architecture.

Jaký je obsah balení

EZ3008sc Fluoride Ion-Selective Electrode (ISE) Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Fluoride Electrode and 1 x empty 2.5L Reagent Container with Fittings (for Buffer Solution)

Technické údaje

Analogové výstupy: Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard 4, optional: 8
Automatické čištění: Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Certifikace: CE, ETL certified to UL and CSA safety standards, UKCA
Demineralised water: Does not apply
Digitální výstupy: Relays: 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)

Ethernet Connections: Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP

RS485 communication: Profibus DP or Modbus RTU
Doba cyklu : Default: 5 minutes
Continuous: 5 minutes
Earth connection: Earth connection Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²
Hmotnost: Max. 35 kg
Instrument air: Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
Interference : Metal ions like aluminium [(Al)³+] > 72 mg/L, calcium [(Ca)²+] > 108 mg/L and iron [(Fe)²+/(Fe)³+] > 150 mg/L. Fats, oil, proteins, surfactants and tar.
Jaký je obsah balení: EZ3008sc Fluoride Ion-Selective Electrode (ISE) Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Fluoride Electrode and 1 x empty 2.5L Reagent Container with Fittings (for Buffer Solution)
Kalibrace: Automatic; 2-point; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
Materiál: Hinged part: Thermoform ABS, Door: PMMA
Wall section: Galvanised steel, powder coated
Metoda měření: Discontinuous, direct measurement by combined Ion-Selective Electrode
  Ion-Selective Electrode
Mez detekce: 0.05 - 2.5 mg/L Fˉ: 0.05 mg/L
0.1 - 5 mg/L Fˉ: 0.1 mg/L
0.2 - 10 mg/L Fˉ: 0.2 mg/L
Napájení: 100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA
Odtok: Atmospheric pressure, vented, min. Ø 32 mm
Okolní teplota: 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
Parametr: Fluoride
Počet proudů vzorku: Standard: 1
Optional accessory for 2, 4, or 8 sample streams
Požadavky na vzorek: Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Přesnost: Better than 2% full scale range for standard test solutions
Průtoková rychlost: 100 - 300 mL/min
Reagent Requirements: Keep between 10 - 30 °C
Rozměry (V x Š x H): 688 mm x 460 mm x 340 mm
Rozsah měření: 0.05 - 2.5 mg/L Fˉ
0.1 - 5 mg/L Fˉ
0.2 - 10 mg/L Fˉ
Teplota vzorku: 10 - 30 °C
Tlak vzorku: By external overflow vessel (open to atmospheric pressure)
Třída ochrany: IP44
Validation: Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Záruka: 24 měsíců