Alarm:
1 x malfunctioning, 4 x user-configurable, max. 24 VDC/0.5 A, potential free contacts
Analogové výstupy:
Active 4 - 20 mA max. 500 Ohm load, standard 1, max. 8 (option)
Automatické čištění:
Ano
Certifikace:
CE compliant / ETL certified
Demineralised water:
For rinsing / dilution
Digitální výstupy:
Optional: Modbus (TCP/IP, RS485)
Doba cyklu :
10 min (dilution + 5 min)
Earth connection:
Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²
Hmotnost:
25 kg
Instrument air:
Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air
Interference :
Oxidising agents such as Chlorine, Sulphur compounds like Sulphide. Large amounts of colour and turbidity interfere. Fats, oil, proteins, surfactants and tar.
Jaký je obsah balení:
EZ1030 Phenol Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x empty 2.5L Reagent Container with Fittings (for Buffer Solution) and 1 x empty 2.5L Reagent Container with Fittings (for Colour Solution)
Kalibrace:
Automatic, 2-point; frequency freely programmable
Materiál:
Hinged part: Thermoform ABS, door: PMMA
Wall section: Galvanised steel, powder coated
Metoda měření:
Colorimetric measurement at 505 nm using 4-aminoantipyrine, conform with standard method APHA
Mez detekce:
≤ 10 µg/L
Napájení:
100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA
Odtok:
Atmospheric pressure, vented, min. Ø 32 mm
Okolní teplota:
10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
Parametr:
Phenol
Počet proudů vzorku:
1, 2, 4, or 8
Požadavky na vzorek:
Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Přesnost:
Better than 3% full scale range for standard test solutions
Přístroj:
EZ1030
Průtoková rychlost:
100 - 300 mL/min
Reagent Requirements:
Keep between 10 - 30 °C
Rozměry (V x Š x H):
690 mm x 465 mm x 330 mm
Rozsah měření:
0.1 - 2 mg/L Phenol
0.1 - 2 mg/L Phenol
Optional:
0.01 - 0.25 mg/L
0.025 - 0.5 mg/L
0.025 - 1 mg/L
0.8 - 8 mg/L (with internal dilution)
1.6 - 16 mg/L (with internal dilution)
2 - 200 mg/L (with internal dilution)
Teplota vzorku:
10 - 30 °C
Tlak vzorku:
By external overflow vessel
Třída ochrany:
Protection class: Analyser cabinet: IP44 / Panel PC: IP65
Validation:
Automatic; frequency freely programmable
Záruka:
24 měsíců
Zdroj napájení:
100 - 240 VAC, 50/60 Hz