Analogové výstupy:
Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard: 4, optional: 8
Automatické čištění:
Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Certifikace:
CE, ETL certified to UL and CSA safety standards, UKCA
Demineralised water:
Internal dilution option: Rinse water & Dilution water
Digitální výstupy:
Profibus DP or Modbus RTU
Doba cyklu :
No Dilution
Default: 15 min.
Continuous: 12 min.
Internal Dilution
Default: 20 min.
Continuous: 15 min.
Earth connection:
Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²
Hmotnost:
Max. 35 kg
Instrument air:
Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
Interference :
Metal ions, e.g., aluminium (III) (Al3+), bismuth (II) (Bi2+), cadmium (II) (Cd2+), chromium (III) (Cr3+), cobalt (II) (Co2+), copper (II) (Cu2+), iron (II) (Fe2+), iron (III) (Fe3+), lead (II) (Pb2+), manganese (II) (Mn2+), magnesium (II) (Mg2+), mercury (II) (Hg2+), palladium (II) (Pd2+), platinum (II) (Pt2+), silver (II) (Ag+), tin (II) (Sn2+) and zinc (II) (Zn2+). Large quantities of color and turbidity interfere. Fats, oil, proteins, surfactants and tar interfere.
Jaký je obsah balení:
EZ1027sc Nickel Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets and Empty Containers for Reagents with Fittings
Kalibrace:
Automatic; 2-point; offset or slope; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
Materiál:
Hinged part: Thermoform ABS, door: PMMA
Wall section: Galvanised steel, powder coated
Metoda měření:
DMG colorimetric method
Mez detekce:
No Dilution
0.005 - 0.25 mg/L Ni: 0.005 mg/L
0.01 - 0.5 mg/L Ni: 0.01 mg/L
Internal Dilution
0.05 - 2.5 mg/L Ni: 0.05 mg/L
0.1 - 5 mg/L Ni: 0.1 mg/L
0.25 - 12.5 mg/L Ni: 0.25 mg/L
0.5 - 25 mg/L Ni: 0.5 mg/L
0.75 - 37.5 mg/L Ni: 0.75 mg/L
1 - 50 mg/L Ni: 1 mg/L
Napájení:
100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA
Odtok:
Atmospheric pressure, vented, min. Ø 32 mm
Okolní teplota:
10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
Parametr:
Nickel
Počet proudů vzorku:
Standard: 1
Optional accessory for 2, 4, or 8 sample streams
Požadavky na vzorek:
Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Přesnost:
Better than 2% full scale range for standard test solutions
Průtoková rychlost:
100 - 300 mL/min
Reagent Requirements:
Keep Buffer between 10 - 25 °C, all other between 10 - 30 °C
Relé :
5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)
Rozměry (V x Š x H):
688 mm x 460 mm x 340 mm
Rozsah měření:
No Dilution
0.005 - 0.25 mg/L Ni
0.010 - 0.5 mg/L Ni
Internal Dilution
0.050 - 2.5 mg/L Ni
0.100 - 5 mg/L Ni
0.250 - 12.5 mg/L Ni
0.500 - 25 mg/L Ni
0.750 - 37.5 mg/L Ni
1 - 50 mg/L Ni
Teplota vzorku:
10 - 30 °C
Tlak vzorku:
By external overflow vessel (open to atmospheric pressure)
Třída ochrany:
IP44
Validation:
Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Výstup:
Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP
Záruka:
24 měsíců