EZ Series Sulphide Analysers

The EZ Series Online Analysers offer multiple options to monitor Sulphide in water. Typical applications are wastewater, drinking water, surface water.

The EZ1000 Series Analysers use colorimetric analysis:
- EZ1037; standard measuring range: 50 - 500 µg/L

The EZ3000 Series Analysers use direct ISE analysis:
- EZ3017; standard measuring range: 1 - 10 mg/L
- EZ3018; standard measuring range: 10 - 100 mg/L

The EZ3500 Series Analysers use ISE measurement with standard addition:
- EZ3518; standard measuring range: 1 - 10 mg/L
- EZ3519; standard measuring range: 10 - 100 mg/L
- EZ3520; standard measuring range: 100 - 1000 mg/L

The EZ4000 Series Sulphide Analysers are single-parameter titrators:
- EZ4031 Sulphide; standard measuring range: 10 - 500 mg/L
- EZ4032 Sulphide; standard measuring range: 20 - 1000 mg/L

Measuring range options:
- EZ1037: Internal dilution
- EZ30xx/35xx: Calibration to 25% (not EZ3017) or 50% of standard range
- EZ40xx: Calibration to 10%, 25% or 50% of standard range

Options for all analysers include:
- Multiple stream analysis (1-8 streams) reducing cost per sampling point
- Analogue and/or digital outputs for communication

Some applications may require the use of a sampling/filtration or an external dilution system for sample preconditioning. For this option please check the EZ9000 Sample Preconditioning page.

Use the filters in the table below to find your online Sulphide analyser. Need support or a different configuration? Please contact us.
 
položek na stránku 10   |   20   |   50